L3 Mobile-Vision Flashback3 User Manual page 252

Save Configuration
10 Press
While this process takes place, a status message will display on-screen.
...COPYING...
Once the
11 Remove the USB stick from the Flashback2.
12 Power down the Flashback2 by moving the red power switch into the down (
position.
13 Fully disconnect all the wires and cables on the back of the Flashback2, then remove
the unit.
14 If your agency's wireless LAN is configured for DHCP , skip to step 25.
– OR –
If your agency's wireless LAN is not configured for DHCP, proceed to the next step.
P a g e 244
. The system copies the Flashback2's configuration file to the USB drive.
COPYING... message disappears, the transfer is complete.
Upgrading from Flashback2 to Flashback3 or FlashbackHD
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
)
OFF