Turning The Wireless Dhcp Option On/Off - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Entering/Changing the Wireless Options
9 To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
10 If the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the
the numeric display higher or lower, respectively. Next, skip to step 12.
11 Press
number displays. (If you overshoot the number, press
12 Use the
13 Repeat steps 10 – 12 until all four segments of the IP address are entered/updated.
14 Press

Turning the Wireless DHCP Option On/Off

This section describes how to turn the wireless DHCP wireless option on/off. If this
option is on, your DHCP server will automatically provide the wireless IP addresses
to this DVR, overriding the values in the IP Address, NetMask, and Gateway fields.
If this option is off, you will have to manually assign IP addresses to this DVR by
entering the IP Address, NetMask, and Gateway fields on the Wireless screen.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
button to advance to the first segment you wish to change.
. The number 255 displays. Keep pressing the
button to advance to the next segment you wish to enter/change.
four times to save your changes and exit this option.
button until the light turns off.)
. The Main Menu displays.
or buttons to move
button until the desired
to back up.)
P a g e 155