Starting A Recording - L3 Mobile-Vision Flashback3 User Manual

DVR Operation

Starting a Recording

Starting a Recording
Regular recordings can be initiated in one of two ways: manually or automatically.
Manual recordings are initiated by the officer in different ways (see descriptions
below). Automatic recordings are initiated by the DVR in response to pre-pro-
grammed "trigger" actions, such as turning your emergency lights on. For more infor-
mation on record triggers, see "Selecting & Configuring Record Triggers" on page 90.
To manually start a recording, first check to make sure the Verifying Storage message
no longer displays.
1
Press
2
Press
Slide the button on the front
3
of your VLP2 or VLX mic
down (see NOTE, right)
Never start a recording while the Verifying Storage message is displayed on your Flashback monitor. Wait until the
*
message disappears before attempting to start a recording!
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
*
Next, perform one of the following actions:
on the DVR
on the monitor
NOTE: In order to initiate a recording
from the VLP2 or VLX, the device must
be turned on, its battery must be
charged, and it must be configured as a
record trigger. For more information,
see "Turning the VLP Microphone
Trigger On/Off" on page 113.
P a g e 27