Turning The Aux 2 Trigger On; Turning The Aux2 Trigger On - L3 Mobile-Vision Flashback3 User Manual

8 Press
9 Press
10 Press

Turning the Aux 2 Trigger On

This section describes how to turn the Auxiliary 2 record trigger on. When this
feature is on, the DVR will automatically begin recording whenever your Auxiliary 2
device (such as a motion detector) is activated.
If desired, you can program the DVR to automatically stop an Aux 2 triggered
recording X number of minutes after the triggering activity ceases. For example, if
your Aux 2 device is a motion detector, the "triggering activity" would be motion. If
the AUX 2 Delay field is set to 5, then after five motionless minutes, the DVR will
automatically stop recording.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
Assuming that the value of the AUX 2 Trigger and AUX 2 Stop fields is ON.
*
P a g e 98
to select the AUX1 Trigger field.
to toggle the field value to ON or OFF.
four times to save your changes and exit this option.
*
button until the light turns off.)
DVR Settings
Selecting & Configuring Record Triggers
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017