Turning The Aux 1 Display On/Off - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Changing Display Options

Turning the Aux 1 Display On/Off

This section describes how to turn the Aux 1 Display on/off so that it either appears
(Aux1 trigger = ON) or does not appear (Aux1 trigger = OFF) on the monitor during
a recording. This display indicates when the Auxiliary 1 trigger is engaged, such as
the Crash Sensor.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 If System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the
4 Press
5 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
button until the light turns off.)
. The Main Menu displays.
to select the System option. The System menu displays.
twice to highlight the Display option.
or button to advance to that option.
P a g e 129