Entering The Officer Name - L3 Mobile-Vision Flashback3 User Manual

14 Press
15 Enter the IP address for the second server, as described in steps 7 – 11.
16 Press

Entering the Officer Name

Normally, the officer name is automatically transferred to the DVR when an officer
logs in using his DVR Login Key. However, there are a few circumstances when you
might want or need to login manually:


By default, the Officer Name field is set to No Name.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 Press the
P a g e 208
.
four times to save your changes and exit this option.
Scenario 1. You are the only person who drives the vehicle in which the DVR is
installed. In this case, you can enter your name once to ensure that all future
videos recorded on the DVR will be linked to you.
Scenario 2. You need to login to a DVR but you have either lost, misplaced, or
forgotten your USB login key.
button until the light turns off.)
. The Main Menu displays.
or button until User is highlighted.
DVR Settings
Entering the Officer Name
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017