Remote Record Button; Radar Interface; Resettable Crash Sensor - L3 Mobile-Vision Flashback3 User Manual

DVR Operation

Remote Record Button

Remote Record Button
L3 Mobile-Vision sells an optional device that
enables you to press a large, lighted red push
button to initiate a recording. One advantage of this
device is that the Record button is large enough to
press while wearing gloves. Another advantage is
that the button is illuminated, making it easy for
you to locate it in a low light environment. If you
are interested in purchasing this device, contact
your L3 Mobile-Vision Sales Representative at
1-800-336-8475.

Radar Interface

The optional radar interface enables you to link your Flashback to your in-car radar
detector. This enables you to display radar readings on the Flashback screen and save
them as part of your videos. The format for the on-screen radar readings is T:# L:#
P:#, where # = miles-per-hour or kilometers-per-hour. T stands for Target Speed, L
stands for Locked Target Speed, and P stands for Patrol Speed, as described below.




Resettable Crash Sensor

The optional Resettable Crash Sensor is a device that's used to detect a vehicle crash
and automatically initiate a recording. To do so, it draws energy from an internal
backup battery rather than from your vehicle battery. The Crash Sensor kit includes a
G-force sensor, backup battery, and cable.
cable
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
Target Speed. The MPH or KPH reading that an officer obtained after the radar
device was aimed at a speeding vehicle.
Locked Target Speed. The minimum MPH or KPH reading that the officer was
looking for when the radar device was aimed at a speeding vehicle.
Patrol Speed. The MPH or KPH reading of the officer's patrol car at the time
a radar reading was obtained.
Backup Battery
Resettable
Crash Sensor
P a g e 25