L3 Mobile-Vision Flashback3 User Manual page 184

24 Press
25 To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
26 If the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the
the numeric display higher or lower, respectively. Next, skip to step 28.
27 Press
number displays. (If you overshoot the number, press
28 Use the
29 Repeat steps 26 – 28 until all four segments of the IP address are entered/updated.
30 Once the correct address displays in the Stop IP field, press
your changes and exit this option.
P a g e 176
to select the Stop IP field.
button to advance to the first segment you wish to change.
. The number 255 displays. Keep pressing the
button to advance to the next segment you wish to enter/change.
DVR Settings
Entering/Changing the Ethernet Options
or buttons to move
button until the desired
to back up.)
four times to save
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017