L3 Mobile-Vision Flashback3 User Manual page 168

5 Press
6 Press
7 To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
8 If the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the
the numeric display higher or lower, respectively. Next, skip to step 10.
P a g e 160
to select the Ethernet option. The Ethernet screen displays.
to select the IP Address field.
button to advance to the first segment you wish to change.
DVR Settings
Entering/Changing the Ethernet Options
or buttons to move
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017