Changing The Wireless Encryption Type - L3 Mobile-Vision Flashback3 User Manual

9 Using the
10 Press
Changing the Wireless Encryption Type (WPA-PSK & WPA Enterprise only)
This section describes how to change the encryption or security type for wireless
mode WPA-PSK or WPA Enterprise. By default, this option is set to AES.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 Press the
P a g e 182
or buttons, display the authentication type you wish to use.
four times to save your changes and exit this option.
button until the light turns off.)
. The Main Menu displays.
or button until Network is highlighted.
Entering/Changing the Wireless Security Settings
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
DVR Settings