Dvr Operating Modes; Front Panel Of Dvr - L3 Mobile-Vision Flashback3 User Manual

DVR Operating Modes

Some of the buttons on the Flashback DVR and monitor are used for different
functions depending on what mode the DVR is in.
Mode
Idle Mode
Record Mode
Play Mode
Menu Mode

Front Panel of DVR

2
1
12
1 IN USE
do not remove the SD card or your files may be lost!
AUTO
2
automatically power on and off, this switch is normally left in the
Do not turn this switch off unless instructed INto do so by an L3 Mobile-Vision
procedure or Service Technician.
MENU
3
also access this menu by pressing the
DVR door is open.
REC
4
recording session. If you are in Record mode, this button is used to toggle the in-car
microphone off/on. If you are in Menu mode, this button is used to select the high-
lighted menu item or field. You can also perform these tasks by pressing the
button on your Flashback monitor.
STOP
5
recording. If you are in Play mode, this button is used to stop a video playback
P a g e 2
Description
The DVR is not recording or playing back a video.
The DVR is recording a video.
The DVR is playing back a recently recorded video.
The DVR's menu functions are displayed.
3
13
14
display. An LED light that denotes DVR activity. When this light is on,
/ . The manual power switch. Because the Flashback is designed to
OFF
. The Menu button, used to access the DVR programming options. You can
. The Record button. If you are in Idle mode, this button is used to initiate a
. The Stop button. If you are in Record mode, this button is used to stop a
4 5 6
7 8 9
button on your Flashback monitor when the
Flashback3 & Flashback HD User's Guide
DVR Operating Modes
10
11
position.
AUTO
L3 Mobile-Vision  6.23.2017