L3 Mobile-Vision Flashback3 User Manual page 181

DVR Settings
Entering/Changing the Ethernet Options
7 Check the value of the DHCPD Service field.
If the value of the DHCPD Service field is ON (default), skip to step 11.
– OR –
If the value of the DHCPD Service field is OFF, proceed to the next step.
8 Press
9 Press
10 Press
Note the value in the Lease Time field. This field is used to select the amount of time,
What is
in minutes, that you want the client to idle on the network before its IP address is
Lease Time?
eligible for reassignment. System default is 15 minutes.
11 To keep the current Lease Time value, press
Next, skip to step 16.
– OR –
To change the current Lease Time value, press
field.
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
to select the DHCPD Service field.
to toggle the field value to ON.
.
twice to advance to the Start IP field.
to advance to the Lease Time
P a g e 173