Dvr Operation; Powering Up; Logging Into A Dvr Using Your Usb Login Key - L3 Mobile-Vision Flashback3 User Manual

DVR Operation

Powering Up

The Flashback is designed to power on automatically whenever you turn your
vehicle's ignition on. This is the recommended method for turning your Flashback
on. You do not have to press any buttons.

Logging into a DVR Using Your USB Login Key

When more than one officer uses the same patrol car, you need a way to identify
yourself to the DVR at the beginning of each shift so that your videos will be linked
to you. That is what the DVR Login Key is used for. It is simply a file that contains
your user information. You copy this file from the DES application to a USB
memory stick, then insert the memory stick in your Flashback's USB port at the
beginning of each shift.
1 If you have not done so already, copy your login information from the DES server to
a USB memory stick. For specific instructions, see "Generating a DVR Login Key"
in chapter 1 of the DEP User's Guide or "Generating a DVR Login Key for an
Officer" in chapter 5 of the DEP Administrator's Guide.
2 Insert the USB memory stick in the Flashback's USB port.
3 Press
NOTE: If this screen says Logout instead of Login, it means that the last officer to
use this DVR forgot to logout. To fix this problem, continue with steps 4 and 5 to log
the last officer out, then repeat steps 3 – 5 to log yourself in.
4 Press
5 Press
6 Remove the USB memory stick.
P a g e 26
. The Login screen displays.
.
.
DVR Operation
Powering Up
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017