Changing The Gateway Type - L3 Mobile-Vision Flashback3 User Manual

8 To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
9 If the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the
the numeric display higher or lower, respectively. Next, skip to step 11.
10 Press
number displays. (If you overshoot the number, press
11 Use the
12 Repeat steps 9 – 11 until all four segments of the IP address are entered/updated.
13 Press

Changing the Gateway Type

This section describes how to change the gateway type. There are two gateway
options: Wireless (default) or Ethernet.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
P a g e 166
button to advance to the first segment you wish to change.
. The number 255 displays. Keep pressing the
button to advance to the next segment you wish to enter/change.
four times to save your changes and exit this option.
button until the light turns off.)
. The Main Menu displays.
DVR Settings
Entering/Changing the Ethernet Options
or buttons to move
button until the desired
to back up.)
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017