Enabling/Disabling The Usb Login Feature - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Entering/Changing System Settings
21 Repeat steps 19 and 20 until the administrator's password is spelled out at the top of
your screen. If you need to add or delete a character, use the following buttons:
 ............Move forward one character
 ............Move back one character
 ............Delete previous character
To insert a space, use the
22 Once the correct password displays, press
exit this option.

Enabling/Disabling the USB Login Feature

When the USB login feature is enabled, officers can use a USB login key to login to
the DVR. When the USB login feature is disabled, officers cannot use a USB login
key to login to the DVR. By default, the USB login feature is enabled.
For more information on the USB Login Key and how it's used, see "Logging into a
DVR Using Your USB Login Key" on page 26.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 If System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the
4 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
icon.
button until the light turns off.)
. The Main Menu displays.
to select the System option. The System menu displays.
four times to save your changes and
or button to advance to that option.
P a g e 203