Entering/Changing The Ethernet Netmask - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Entering/Changing the Ethernet Options
9 Press
number displays. (If you overshoot the number, press
10 Use the
11 Repeat steps 8 – 10 until all four segments of the IP address are entered/updated.
12 Press

Entering/Changing the Ethernet NetMask

This section describes how to enter or change the netmask IP address for the internal
Ethernet LAN interface. For more information on when/why you might need to
update this field, see "Entering/Changing the Ethernet Options" on page 158.
WARNING: If you are using both a wireless network and an Ethernet network, each
NetMask must be unique. You cannot use the same NetMask for both networks!
NOTE: If you want your DHCP server to automatically provide the Ethernet
addresses to this DVR, do not enter this field. Instead, turn the Ethernet DHCP option
on, as described in "Turning the Ethernet DHCP Option On/Off" on page 169.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 Press the
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
. The number 255 displays. Keep pressing the
button to advance to the next segment you wish to enter/change.
four times to save your changes and exit this option.
button until the light turns off.)
. The Main Menu displays.
or button until Network is highlighted.
button until the desired
to back up.)
P a g e 161