Turning The Ethernet Dhcp Option On/Off - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Entering/Changing the Ethernet Options

Turning the Ethernet DHCP Option On/Off

This section describes how to turn the Ethernet DHCP wireless option on/off. If this
option is on, your DHCP server will automatically provide the Ethernet IP addresses
to this DVR, overriding the values in the IP Address, Netmask, and Gateway fields. If
this option is off, you will have to manually assign IP addresses to this DVR by
entering the IP Address, Netmask, and Gateway fields.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 Press the
4 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
button until the light turns off.)
. The Main Menu displays.
or button until Network is highlighted.
to select the Network option. The Network menu displays.
P a g e 169