L3 Mobile-Vision Flashback3 User Manual page 183

DVR Settings
Entering/Changing the Ethernet Options
NOTE: The IP range that you specify in the Start IP and Stop IP fields must be
outside the range of any existing DHCP servers.
17 To enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the
18 If the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the
the numeric display higher or lower, respectively. Next, skip to step 20.
19 Press
number displays. (If you overshoot the number, press
20 Use the
21 Repeat steps 18 – 20 until all four segments of the IP address are entered/updated.
22 Once the correct IP address displays in the Start IP field, press
23 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
button to advance to the first segment you wish to change.
. The number 255 displays. Keep pressing the
button to advance to the next segment you wish to enter/change.
to advance to the Stop IP field.
or buttons to move
button until the desired
to back up.)
.
P a g e 175