L3 Mobile-Vision Flashback3 User Manual page 220

You will be using this keyboard to spell out the unit's name and/or number. Begin by
deleting the old unit name, as described in steps 7 and 8.
7 Press
8 Press
9 Using the following navigation buttons, highlight the first letter or number of the unit
you wish to enter.
....... Up
....... Down
....... Right
....... Left
10 Press
11 Repeat steps 9 and 10 until the unit name is spelled out at the top of your screen.
If you need to add or delete a character, use the following buttons:
 ............Move forward one character
 ............Move back one character
 ............Delete previous character
To insert a space, use the
12 Once the correct unit name displays, press
exit this option.
P a g e 212
to highlight the  icon.
several times until the existing unit name is deleted.
. The selected character displays at the top of the screen.
icon.
Entering the DVR Unit Name
three times to save your changes and
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
DVR Settings