Vlx Light Indicators - L3 Mobile-Vision Flashback3 User Manual

Peripherals
VLX Wireless Microphone

VLX Light Indicators

On the top of the VLX, there are four light indicators: the Signal, Battery, Mute, and
MIC Error.
These light indicators and their meaning(s) are described in the following table.
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
Indicator Color
Solid green
Signal
Blinking
green
Signal
Blinking red
Signal
Solid orange
Signal
Blinking red
Mute
Solid red
Mic Error
Solid red
Battery
Meaning
Recording is in progress; s ignal between the wire-
less mic and docking station is good. The two de-
vices are in sync.
Signal between the wireless mic and docking sta-
tion is marginal and audio is likely interrupted.
This occurs because you are nearly out of range or
there is a barrier of some sort (metal, for example)
interrupting the signal from the wireless mic to the
docking station. To regain a reliable audio con-
nection, move back within range of the docking
station.
Recording is in progress but the wireless mic is
out of range; the DVR is not receiving audio from
the wireless mic.
There is an active connection with audio to the
DVR, but the DVR is not recording, typically be-
cause the DVR door is open or there is no mem-
ory card in the DVR's card slot.
Audio is temporarily muted. This occurs when
you hold the Record switch down for at least two
seconds while a recording is in progress.
External lapel microphone is not functioning pro-
perly and may need to be replaced. In this circum-
stance, the audio source will automatically switch
to the unit's internal microphone.
Battery level is low—less than 2.5 hours.
P a g e 23