Transferring A Firmware File From A Usb Drive To A Dvr - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Viewing/Updating Firmware

Transferring a Firmware File from a USB Drive to a DVR

This section describes how to manually copy the latest firmware version from a USB
memory stick to your DVR. Before you perform this task, copy the latest firmware
file from the Flashback application to a USB stick, as described in "Copying a Firm-
ware File from DEP to a USB Drive" in chapter 5 of the DEP Administrator's Guide.
1 Verify that all videos have been removed from the Flashback DVR unit. If there are
any videos remaining on the DVR's SD card, remove the card from the DVR and
perform a manual upload. For more information on manual uploads, see "Manually
Uploading Videos from an SD card Reader or ESU" in chapter 2 of the DEP
Administrator's Guide.
2 Take the USB drive that contains the firmware file and insert it into the USB port on
the front of your Flashback DVR.
3 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
4 Press
5 If System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
button until the light turns off.)
. The Main Menu displays.
or button to advance to that option.
P a g e 215