Entering The Dvr Unit Name - L3 Mobile-Vision Flashback3 User Manual

8 Using the following navigation buttons, highlight the first letter of the officer name
you wish to enter.
....... Up
....... Down
....... Right
....... Left
9 Press
10 Repeat steps 8 and 9 until the officer name is spelled out at the top of your screen.
If you need to add or delete a character, use the following buttons:
 ............Move forward one character
 ............Move back one character
 ............Delete previous character
To insert a space, use the
11 Once the correct name displays, press
this option.

Entering the DVR Unit Name

This section describes how to assign a name and/or number to your DVR. Many
agencies give their DVRs the same name as the vehicle in which they are installed,
such as "Unit 146."
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
3 Press the
P a g e 210
. The selected character displays at the top of the screen.
icon.
button until the light turns off.)
. The Main Menu displays.
or button until User is highlighted.
Entering the DVR Unit Name
three times to save your changes and exit
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
DVR Settings