Entering The Server Address - L3 Mobile-Vision Flashback3 User Manual

DVR Settings
Entering/Changing System Settings
8 Press
9 Press
10 Press

Entering the Server Address

This section describes how to enter the IP address that identifies your agency's DES
storage server. This procedure is only necessary in special situations. Do not enter
this information unless instructed to do so by your Network Specialist and/or L3
Mobile-Vision Technical Support Engineer.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the
2 Press
Flashback3 & Flashback HD User's Guide
L3 Mobile-Vision  6.23.2017
to select the Login Access field.
to toggle the field value to ON (enabled) or OFF (disabled).
four times to save your changes and exit this option.
button until the light turns off.)
. The Main Menu displays.
P a g e 205