Skyguard™ Operation - JLG 1850SJ Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
4.13 SKYGUARD™ OPERATION
SkyGuard™ is used to provide enhanced control panel protection.
When the SkyGuard™ sensor is activated, functions that were in
use at the time of actuation will reverse or cutout. The table
below outlines these functions.
Main
Main
Tele
Lift
In
R C
R = Indicates Reversal is Activated
C = Indicates Cutout is Activated
N/A Indicates the function does not exist for this model
* Disregard when boom is inline and driving forward with or without steering and no other functions active.
Note: When Soft Touch is enabled with SkyGuard™ all functions are cut out only.
4-24
Table 4-3. SkyGuard™ Function Table
Drive
Main
Forward
Tele Swing
DOS DOS Not DOS
Out
Enabled Enabled Enabled
R R R C*
NOTE: Reverse motion can be stopped by the operator by releasing the
footswitch, depressing the emergency stop button, or by releas-
ing pressure on the SkyGuard™ sensor.
Drive
Tower Tower
Reverse
Lift Lift
DOS Not
Up Down
Enabled
R R N/A N/A
– JLG Lift –
Platform Platform Jib Jib
Level Rotate Lift Rotate
C C C C
Jib
Tele
C
3121618