4.10 Skyguard Operation - JLG 400S Operation Manual

4.10 SKYGUARD OPERATION

Skyguard is used to provide enhanced control panel protection.
When the SkyGuard sensor is activated, functions that were in
Main
R = Indicates Reversal is Activated
C = Indicates Cutout is Activated
* Disregard when boom is in line and driving forward with or without steering and no other functions active.
Note: When Soft Touch is enabled with SkyGuard all functions are cut out only.
3121670
Table 4-1. Skyguard Function Table
Main Main
Tele Tele Swing
Lift
In Out
R C R R
use at the time of actuation will reverse or cutout. The table
below outlines these functions.
Drive Drive
Forward Reverse
Tower Tower
Lift Lift
DOS
DOS
Up Down
Not
Enabled
Enabled
R C* R R R C
– JLG Lift –
SECTION 4 - MACHINE OPERATION
Platform Platform Jib
Level Rotate Lift
C C C
4-13