Step 8 – Installation of Cylinder in Outside Trim (Optional)
Cylinder
Cylinder Collar
Backplate
Outside Trim
Assembly
An ASSA ABLOY Group brand
Cylinder Retaining Nut
Step 9 – Assemble the Top Latch to the Frame
• Insert the Cylinder into the Cylinder Collar
• Place the Cylinder Retaining Nut against the
backplate of the outside trim assembly,
• Feed the cylinder and cylinder collar into the
cylinder hole of the escutcheon and screw the
cylinder retaining nut to the cylinder until it is
fully seated with the cam straight up as shown.
• Secure the cylinder to the escutcheon by
tightening the cylinder retaining nut.
• Assembly the top latch into the top of the frame
using (4) 1/4"-20 x 1" Flat Head Cap Screws.
The angled surface should face the shutter.
9
80-8470-7370-010 (10-12)