FM6100 Series Multi-Point Lock
Installation of Cylinder in Outside Trim (Optional)
8
• Insert the Cylinder into the Cylinder Collar
• Place the Cylinder Retaining Nut against the backplate of the outside trim assembly.
• Feed the cylinder and cylinder collar into the cylinder hole of the escutcheon and screw the
cylinder retaining nut to the cylinder until it is fully seated with the cam straight up as shown.
• Secure the cylinder to the escutcheon by tightening the cylinder retaining nut.
Cylinder
Backplate
Outside Trim
Assembly
Assemble the Top Latch to the Frame
9
• Insert the top latch into the top of the frame using
(4) ¼" – 20 by 1" Flat Head Screws. The angled
surface should face the shutter.
Cylinder
Collar
Cylinder Retaining Nut
(4) Flat Head Screws
A8058:A • www.sargentlock.com
9