Table of Contents
Advertisement
Install the Shutter into the frame assembly and shim for proper shutter gap and for the
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their
respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.
Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
An ASSA ABLOY Group brand
Step 10 – Installation of Deadbolt Strike
Deadbolt Strike
Step 11 – Install the Bottom Strike
Bottom Strike
Strike Shim
shutter being square and plumb.
Product Support Tel 800.
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2010, 2012 Yale Security Inc., an ASSA ABLOY Group company.
• Assemble the Deadbolt Strike to the frame
using (2) 1/4"-20 x 1" Flat Head Cap Screws.
• Place the Bottom Strike into the Strike Shim
and fasten to the frame using (2) 1/4"-20
Screws.
438.1951
• www.yalelocks.com
80-8470-7370-010 (10-12)
Advertisement
Table of Contents
