Page 1
See note. D. Drill pilot holes for latch Note: screws. 7/64" (2.5mm) dia. To avoid splintering wood (Except Dummy Trim) doors, drill holes (A) and (C) from both sides of the door. P/N 80-9150-0075 Rev C An ASSA ABLOY Group brand...
Page 2
Install lever handle. Knotch Retractor Latch engages bolt Machine Screw tail(s) Aligning Dimple Turnbutton Inside Rose Lockbody Support Assembly Frame engages latchcase Rose Scalp Inside Lever P/N 80-9150-0075 Rev C An ASSA ABLOY Group brand...
Page 3
Pull on handle to insure properly seated. Note: Cylinder and Sleeve must be properly installed or the security of the lock will be compromised. P/N 80-9150-0075 Rev C An ASSA ABLOY Group brand...
Page 4
These materials are protected under U.S. copyright laws. All contents current at time of publication. Yale Security Inc., an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.
Need help?
Do you have a question about the Yale YM Series and is the answer not in the manual?
Questions and answers