Summary of Contents for Assa Abloy Yale Real Living Assure Lock SL Series
Page 1
Yale Assure Lock ® ® Key Free Touchscreen Deadbolt ® Installation and Programming Instructions 256/ 456) Optional Network Module Before you begin #7 wood & #8-32 DOWNLOAD #8-32 x 5/16" machine x 20mm Machine screws Combination screws THE BILT APP for step-by-step installation instructions &...
Page 2
Preparing Door Refer to template for correct door prep YRL SLKFTSINSTL FUL Rev D...
Page 3
Installing Latch & Strike Plate 2-3/8" position d faut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. YRL SLKFTSINSTL FUL Rev D...
Page 4
Installing Touchscreen Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. YRL SLKFTSINSTL FUL Rev D...
Page 5
Installing Interior Mounting Plate Loosen screw to remove cover. Choose through bolt appropriate for your door thickness. YRL SLKFTSINSTL FUL Rev D...
Programming Instructions Exterior Escutcheon "P" Key (Return to Previous) Speaker Interior Escutcheon Lockout Mode Low Battery Indicator Failsafe 9 volt Battery Connection (Use Alkaline battery) Privacy Mode Button Lock Activation Master Code must be created before any further programming. Max User Codes = 250 with Z-Wave Plus or ZigBee network module Max User Codes = 25 without network module or with iM1 network module Max User Codes - 12 with Bluetooth YRL SLKFTSINSTL FUL...
Page 12
Creating Master Code Creating a Master Code must be performed upon installation or after resetting the lock to factory default. Programming and use of lock is not possible until this step has been successfully completed. "Register Master Code. Press the gear key to continue."...
Creating User Codes Master code must be created first. *Max user codes = 250 with Z-Wave Plus or ZigBee network module Max user codes = 25 without network module or with iM1 network module Max user codes = 12 with Bluetooth "Menu Mode, enter number, press the gear key...
Unlocking Door with Code Enter Code Press Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Name PIN Code YRL SLKFTSINSTL FUL Rev D...
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2.
Page 16
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the locked padlock will appear on the screen.
Page 17
Feature Programming Through Menu Mode Using Master code* 1. Touch screen with back of hand or palm to activate. 2. Enter 4-8 digit master code* followed by key. Lock Response: "Menu mode, enter number, press key to continue." 3. Enter digit corresponding to the function to be performed followed by the key.
Programming Troubleshooting Symptom Suggested Action Touchscreen becomes active when pressed w/whole hand. • Use a larger area of the hand or fingers and verify contact Lock does not respond – with at least 3 areas. door is open and • If touchscreen numbers are visible, check to see if they accessible.
Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Door is binding a. Check that door and frame are properly aligned and door is free swinging. b. Check hinges: They should not be loose or have excessive wear on knuckles. Bolt will not deadlock a.
Page 20
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. Product Support Tel 1-855-213-5841 • www.yalehome.com Yale , Yale Real Living and Assure Lock® are registered trademarks of ASSA ABLOY Residential Group. Other ®...
Page 21
Yale Z -Wave Plus Module ® ® ® Installation and Programming Instructions Installing the Z -Wave Plus Module ® IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover and batteries. • Remove and/or insert Network Module. •...
Page 22
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.
Page 23
Yale ZigBee Module ® ® ® Installation and Programming Instructions Installing the ZigBee Module ® IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover. • Remove batteries. • Remove and/or insert network module. •...
Page 24
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.
Page 25
Yale iM1 Network Module ® ® Installation and Programming Instructions Installing the Yale iM1 Network Module IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover and batteries. • Remove and/or insert Network Module. •...
Page 26
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale®, Yale Real Living® and Assure Lock® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company. nexTouch™ is a trademark of Yale Security Inc., an ASSA ABLOY Group Company.