Table of Contents
Advertisement
Drill Guide
Clamping Screw
An ASSA ABLOY Group brand
Step 5 – Applying the drill jig for proper drilling
Deadbolt
Lever
Drill Guide
Positioning
Holes
Drill Guide
Positioning Pins
Drill Guide
Hole
• Manually project the deadbolt by applying force
to the deadbolt lever toward the bottom of the
shutter.
• The deadbolt lever is now in a position to allow
the Drill Guide to be positioned above the
deadbolt and fixed into position using the two
drill guide positioning holes provided in both
sides of the deadbolt case.
• The Drill Guide is an alligator type jig. Loosen
the Drill Guide clamping screw, allowing the
jaws to rotate 90 degrees to allow the guide to
be positioned above the deadbolt and closed
around the shutter so that the pins on both
sides of the Drill Guide engage the two Drill
Guide Positioning Holes.
• Once the Drill Guide is engaged in the
positioning holes, tighten the Drill Guides
clamping screw so that it will firmly secure the
jig around the shutter.
• Using the Drill Guide Hole, drill a 1/8" hole (drill
provided with jig components) thru both sets of
rods.
7
80-8470-7370-010 (10-12)
Advertisement
Table of Contents
