Installation Of The Mechatronic Verso Cliq Locking Cylinder - Assa Abloy IKON VERSO CLIQ V551 Operating Instructions Manual

Installation of the
mechatronic VERSO CLIQ
Cylinder fixing screw length
A 85 mm long cylinder fixing screw is suitable for locks with a backset of
up to 75 mm. The following applies to locks with a larger backset:
Length of the cylinder fixing screw = backset size + 10 mm.
Installing the profile c ylinder
Prerequisite: The mortise lock must be completely installed.
Observe the installation instructions with figures ("Figures", page 98).
An optional change of the cam position is possible with profile cylinders
("Optional: Changing the position of the locking cam", page 99).
1 Insert the profile cylinder into the profile cylinder cutout.
2 Fix the profile cylinder in place with the fixing screw.
The cylinder fixing screw supplied is suitable for locks with a backset
of up to 75 mm. The following applies for locks with a larger backset:
Length of the cylinder fixing screw = backset + 10 mm.
3 Only hand-tighten the cylinder fixing screw. (max. 3.5 Nm).
4 Test the locking cylinder for correct function and ease of movement.
For this purpose, actuate the locking cylinder several times with the
appropriate key.
 You have installed the profile cylinder.
Cylinder mounting
® locking cylinder
EN 43