Step 8 - Installation Of Cylinder In Outside Trim (Optional); Step 9 - Assemble The Top Latch To The Frame - Assa Abloy Corbin Russwin FE6700 Series Installation Instructions Manual

Cylinder
Cylinder Collar
Backplate
Outside Trim
Assembly
ASSA ABLOY, the global leader in door opening solutions
Step 8 – Installation of Cylinder in Outside Trim
Cylinder Retaining Nut
Step 9 – Assemble the Top Latch to the
· Assembly the top latch into the top of the frame using (4)
¼" – 20 by 1" Flat Head Cap Screws. The angled surface
should face the shutter.
(Optional)
· Insert the Cylinder into the
· Place the Cylinder Retaining
· Feed the cylinder and
· Secure the cylinder to the
Frame
9
Cylinder Collar
Nut against the backplate of
the outside trim assembly,
cylinder collar into the
cylinder hole of the
escutcheon and screw the
cylinder retaining nut to the
cylinder until it is fully
seated with the cam straight
up as shown.
escutcheon by tightening the
cylinder retaining nut.