Yale YDD424A - DeadBolt Smart Lock Manual

Front Body (Front Body, installation on the outside of the door)

	Fingerprint Sensor
	Keypad(10-key)
	Dead Bolt Jam Lamp
	Battery Change Lamp
	Emergency Power Supply Terminal (Emergency Key)
	Emergency Power Supply Terminal (9V Emergency alkaline battery)

Optional

9V Emergency alkaline battery

Emergency Key

Basic Contents

• User Manual
• Installation Guide
• Screws

Optional Accessories

• Remote Controller
• Remote Control Module
• Bluetooth Module

Specifications

※ Battery life may vary depending on temperature, moisture levels, frequency of use and the quality of the batteries.

※ Please make sure that all parts are included when purchasing the product.

※ Optional products may not be available depending on your country or local dealer.

Main Body (Main Body, installation on the inside of the door)

	Registration button
	Slot for Remote control module (Optional)
	1.5V AA Alkaline Batteries (4PCS)
	Thumb turn knob
	Battery Cover
	Open / Close button

Setting Menu

Normal Mode: Without a designated person, anyone who knows 'User PIN Code' has authority to set features.

Master Code: Only a designated person who knows 'Master PIN Code' has authority to set features.

Visitor Code: The visitor code is different from user code and given out to visitors only.

Onetime Code: The onetime code is used only once for unlocking the door lock and automatically deleted after usage.

User Slot Number: It should be 2 digits(like '01', '02'...'99', '00') and available in advanced mode.

	Touch the Keypad of the Front Body with your palm to begin
	Press button on the Keypad
	Press button on the Keypad
	Press (Registration) button in every steps to start or complete the session
	Enter User Fingerprint (Up to 100EA)
	Enter User Code (4 ~ 10 digits)
	Enter Master Code (4 ~ 10 digits)
	Enter Visitor Code (Only 4 digits)
	Enter Onetime Code (Only 4 digits)
	User Slot Number should be 2 digits (like '01'... '99' and '00': Location of 100th user slot must be assigned "00" instead of "100". )
	Rotation area to add more features

Product Features

One-touch Fingerprint Verification

Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching The leading liveness performance improves the security of Yale smart lock dramatically.

Yale Access Bluetooth App (Yale Access BLE module: optional item)

This service is an innovative solution provided by YALE. Using high-tech IoT technology, user can access and unlock the digital door lock with your smartphone.

Smart Touchpad Automatic Locking

The automatic lock sensor detects the door closing and locks the door automatically within 5 seconds. The door locks when touch the keypad with the palm.

As the automatic lock function does not work in manual lock mode, make sure to check that the door is securely locked when leaving the premises.

3 minute Lock Out Feature

After five (5) unsuccessful attempts of an invalid code or fingerprint, lock out mode is activated for 3 minutes.

Smart Etiquette

When entering a pin code on the keypad, the user can open the door lock in silent mode.

Fake PIN Code

Security enhancement to enter any number before or after entering a password to prevent the PIN code from being exposed.

Internal Forced Lock

It is a security-enhancing function that 'disables' authentication methods such as passwords, RFID cards and fingerprints from outside when setting up functions indoors.

External Forced Lock

It is a security-enhancing function that an alarm goes off if someone opens door from inside when setting up functions outside.

Voice Guide Feature

It guides user the operation status how to set each features, mode for easier and more convenient use.

Other features and Benefits

• Remote Controller (Optional):
  This option may not be available depending on your country or local dealer.
• Network Module/Controller (Optional):
  It allows door lock to connect with Home network controller.
• Intrusion/Broken Alarm.
• Low Battery Alarm and Emergency Power Supply.

Normal Mode (Default Mode)

Normal mode is a convenient mode for anyone to set the digital door lock. User can set password like user code, visitor code, onetime code and register user's fingerprints as well. Factory default is a normal mode.

How to press set button of remote controller

Press the set(registration) button located on the front of remote controller. You can press it using a pin like the picture.

Please note the following when using Yale Access Bluetooth App.

• Depending on product type or FW version, app registration and door lock connection in normal mode may not be possible, so if registration is not possible, change from normal mode to master mode and try again.
  [ App Registration in Master Mode: Master Pin Code-> R (Registration Button)-> 7 -> # ]
• Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to master code when registering APP in normal mode.
• Please be informed that all registered credentials will be deleted when changing mode or registering and deleting app.

Unlocking Door with Fingerprint

Touch the panel of fingerprint area sensor using registered fingerprint for 1 second


Fingerprint scan completed

Unlocking Door with Code

Palm touch


Enter the Code


Palm touch
OR

Enter the button

Unlocking Door with Smart Etiquette.

Palm touch for 3 sec.


Enter the User PIN Code then touch the keypad with your Palm.

Open/Close the door from inside

Open/Close button

Press Open/Close button.

Thumb turn knob

To open the lock, turn manual thumb turn knob from 'Close' direction to 'Open' direction.

Locking the door

To Close Door from Outside

Auto Lock status:

The built-in Auto Lock sensor automatically Locks a door within 5 seconds after the door was closed.

Manual Lock status:

Touch the keypad in the front body gently with your palm to lock a door.

To Close Door from Inside

Auto Lock status:
The built-in Auto Lock sensor automatically locks a door within 5 seconds after the door was closed.

Manual Lock status:
Turn manual thumb turn knob to close the lock, Into 'Close' marked direction.

※ Even after a door was locked by the Auto Lock function, please check again if the door was completely closed and locked.

External Forced Lock

External Forced Lock Setting-Fingerprint

Scan with registered fingerprint and hold the fingerprint area until you hear 3 beep sounds.

External Forced Lock Setting – User Code

Palm touch


Enter the User PIN Code


Enter the button for 5 Sec.

Releasing External Forced Lock Setting

When the door is unlocked from outside based upon proper authentication, the External forced lock will be released.

Internal Forced Lock

Setting

Press Open/Close button for 3 seconds until you hear "pik" beep.

Release

Method 1: Press Open/Close button for 3 seconds until you hear "pik" beep.

Method 2: Turn manual thumb turn knob.

※ If you try to open a door with the manual thumb turn knob from inside when the Outside Forced Lock is set, the alarm goes off.

※ If the Inside Forced Lock is set, any attempt to open a door from outside whether it's be a Fingerprint or code won't work.

Alarm

Intrusion Alarm: The alarm goes off when someone forces the door open. For example, In case of an intrusion by opening a gap in the door while the door is locked.

Broken Alarm: The alarm sounds when the front part is completely separated from the main set. For example, forced removal of external product (front body).

To turn off Alarm

• Enter the registered User Code.
• Scan the registered fingerprint.
• Press and hold the O/C Button for 5 seconds.

3-minute Lock Out Feature

If an invalid user code, fingerprint is entered five(5) times in a row, lock out mode is activated and all buttons on the front body are not activated for three minutes.

To Release 3-minute Lock Out

• Press the Open/Close button.
• Open the door with mechanical key.
• Press button.

Unlocking Door with Fake Code

There is no limitation for digits of Fake Pin Code.

Palm touch


Enter the User Code and Fake Code
OR

Enter the Fake Code and User Code


Palm touch

Power supply

The product uses four 1.5V Alkaline AA batteries. They may sustain 1 year if used 10 times a day.(Users are advised to use authentic Alkaline batteries.)

You must replace all 4 batteries in the following cases:

• The Low Battery LED on keypad flickers red.
• When low battery notification message is played.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE OR RECYCLING PROGRAM.

Emergency power supply for discharged batteries

Contact 9V battery


Palm touch


Enter the User Code and Palm touch

Code Chart

Duplicate if necessary

Master Mode

Master mode is a mode in which only the administrator can set the door lock and provide access to other users. 100ea user passwords, 100ea fingerprint and individual registration and deletion of one-time passwords enable efficient management of visitors.

※ User Slot Number should be 2 digits.
like '01'... '99' and '00': Location of 100th user slot must be assigned "00" instead of "100".

※ Voice guidance function: The lock provides voice guidance for user and it will be helpful to set up lock's features correctly.

※ All registered passwords and other credentials can be deleted at the time of mode change.

※ Please install (register) the network module when you want to use a remote control or home network.

Important notes

Do not install the digital door lock in an outdoor environment.

Do not attempt to disassemble the digital door lock by yourself.

Do not spray water directly or wipe with chemicals such as benzene, gasoline or alcohol.

Do not use force with a tool onto the product.

When using, remember that someone else can see the password.

Make sure to lock the door tight when you go out.

Safety and Warning

• Do not install the digital door lock in an outdoor environment.
• Do not attempt to disassemble the digital door lock by your self. By doing so, you may get an electronic shock and damage the product.
• Do not use force with a tool onto the product.
• Make sure to lock the door tight when you go out.
• Be careful not to hit the handle as it may cause injuries.
• Do not use water and any type of solvent to clean the product such as gasoline or benzene as they can cause damage to electronic circuit, deterioration and or paint peel-off.
• It is recommended to change User Code on a regular basis.
• In manual lock mode, make sure to double check whether the door is securely locked.
• When External Forced lock is set and unlock the door, the alarm will be activated.
• Do not use rechargeable batteries. Only alkaline batteries are recommended.
• Make sure to follow the above instructions to avoid any injuries.
• It cannot be guaranteed in a special conditions & environment such as water condensation, seaside.

PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed without prior notice for performance and quality improvement.

Packaging of this product can be recycled.

WEEE Note:
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check your local authority or retailer for recycling advice.

ISL-1857-00-022