Summary of Contents for Assa Abloy Yale Real Living YRD426
Page 1
Yale Assure Lock ® ® Touchscreen Deadbolt ® Installation and Programming Instructions (YRD226/YRD426) Optional Network Module Before you begin DOWNLOAD THE BILT APP for step-by-step installation instructions & to register your product #8-32 x 5/16" Machine screws #7 wood & #8-32 M6x59.5mm machine x 20mm Long through bolt...
Page 2
Preparing Door P/N YRL-TSINSTL-FUL Rev G...
Page 3
Optional Fire Kit Parts For Model YRD620 ONLY optional Installing Optional Fire Cup optional Inside of Door P/N YRL-TSINSTL-FUL Rev G...
Page 4
Installing Latch & Strike Plate 2-3/8" position defaut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. P/N YRL-TSINSTL-FUL Rev G...
Page 5
Installing Touchscreen Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation optional of mechanism. P/N YRL-TSINSTL-FUL Rev G...
Programming Instructions Exterior Escutcheon "P" Key (Return to Previous) Interior Escutcheon Low Battery Indicator Lockout Mode Privacy Mode Button Speaker Master PIN Code must be created before any further programming. Max User Codes = 250 with Z-Wave Plus or ZigBee network module Max User Codes = 25 without network module or with iM1 network module Nax User Codes = 12 with Bluetooth P/N YRL-TSINSTL-FUL Rev G...
Page 14
Creating Master PIN Code Creating a Master PIN Code must be performed upon installation or after resetting the lock to factory default. Programming and use of lock is not possible until this step has been successfully completed. "Register Master Code. Press the gear key to continue."...
Page 15
Creating User PIN Codes Master PIN code must be created first. *Max user codes = 250 with Z-Wave Plus or ZigBee network module Max user codes = 25 without network module or with iM1 network module Max user codes = 12 with Bluetooth "Menu Mode, enter number, press the gear key...
Unlocking Door with PIN Code Enter PIN Code Press Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Type User Name User # PIN Code Master User ___ User ___ User ___ User ___ User ___ User ___...
Page 17
Resetting Lock to Factory Default Interior Escutcheon When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2.
Page 19
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the RED locked padlock will appear on the screen.
Page 20
Model YRD226 Feature Programming Through Menu Mode Using Master PIN code* 1. Touch screen with back of hand or palm to activate. 2. Enter 4-8 digit master PIN code* followed by key. Lock Response: "Menu mode, enter number, press key to continue." 3.
Page 21
Model YRD620 Feature Programming Through Menu Mode Using Master PIN code* 1. Touch screen with back of hand or palm to activate. 2. Enter 4-8 digit master PIN code* followed by key. Lock Response: "Menu mode, enter number, press key to continue." 3.
Programming Troubleshooting Symptom Suggested Action Touchscreen becomes active when pressed w/whole hand. Use a larger area of the hand or fingers and verify contact Lock does not respond – with at least 3 areas. door is open and If touchscreen numbers are visible, check to see if they accessible.
Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Bolt will not deadlock a. Check for sufficient clearance of the bolt within the strike-side jamb. Correct this by increasing the depth of the pocket for the bolt. b.
Page 24
Product Support Tel 1-855-213-5841 • www.yalehome.com Yale®, Yale Real Living® and Assure Lock® are registered trademarks of ASSA ABLOY Residential Group. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.