Table of Contents
Advertisement
To set up user permissions for guest login
You can manage user access to certain functions of the FV-110GX. You can allow or
deny users that are not administrators (user name: guest, password: guest) to access
certain functions and make these pages read-only. This is useful to protect the system
against unintended changes or tampering of the system.
Change network
Change e-mail settings Change e-mail addresses for sending reports. For further
Modify antenna data
Control modem
Important
To set up the user permissions for guest users, do as follows:
1. From the left navigation pane, select ADMINISTRATION > User permissions.
2. For each item under ALLOW USERS TO: select
Item
Change IP configuration of the LAN connectors of the ACU. For
further information see To configure the LAN network on page 5-
23.
information see E-mail setup on page 5-25.
Only used during service and maintenance when you exchange
modules in the antenna.
Allow to reset or power cycle the modem.
Table 5-13: Selected items in the list with user permissions
Figure 5-25: Web interface: ADMINISTRATION, User permissions
Study this screen thoroughly and decide which areas of the FV-110GX
system non-administrator users (user name: guest) can access.
Configuration with the web interface
Description
:
5-33
Advertisement
Table of Contents
