Furuno FV-110GX Operator's Manual page 45

14.Attach the N connector of the ADU cable to the ADU and fasten it with 2.5 Nm.
Figure 2-19: Connecting the ADU cable (for the new antenna)
15.Ensure that the connector assembly is properly protected against seawater and
corrosion. As a minimum, wrap it with self-amalgamating tape.
16.Where the cables are exposed to mechanical wear – on deck, through bulkheads, etc. –
protect the cables with steel pipes. Otherwise, follow standard procedures for cabling
in ship installations.
Installation of the ADU
2
N connector
4
2-21