Table of Contents
Advertisement
Command
satellite max_inc
satellite max_inc 2.5
satellite rx_pol
satellite rx_pol v
satellite tx_pol
satellite tx_pol v
satellite ele_cut_off
satellite ele_cut_off 5
satellite rx_lo
Table C-7: UCLI command: satellite (Continued)
Description
Shows or sets the maximum inclination of the
used satellite. Some satellites are old and are
therefore moving in larger circles in space.
Setting the maximum inclination will add this to
the FV-110GX system acquisition window size
used to find the satellite.
• Maximum inclination of satellite 0.0° to 90°
Shows or sets the current RX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
Shows or sets the current TX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
Shows or sets the elevation referenced to earth
where the FV-110GX system must shut off for
transmission. This is an FCC requirement. The
elevation cut off depends on how much power is
transmitted and which coding is used.
• Valid range: 0° to 90°
Shows the Rx LO / LNB LO.
Range: 9.6 GHz to 11.3 GHz.
GX: 18.25 GHz
Supported commands
C-5
Advertisement
Table of Contents
