Furuno FV-110GX Operator's Manual page 44

Installation of the ADU
10.Select a suitable size for the cable gland: 16—20 mm diameter or 19–23 mm diameter.
See also N-connector interface on the ADU on page 2-22 for a more detailed drawing
how to connect the N-connector on the ADU.
1
3
5
11.Ensure that the connector assembly is properly protected against seawater and
corrosion. As a minimum, wrap it with self-amalgamating rubber.
12.Put the protection plate in place and fasten the 4 bolts (picture 5).
13.Fasten the nut. Go to step 16.
2-20
Figure 2-18: Connecting the ADU cable (for the current antenna)
Protection plate Protection plate
2
4
6
N connector N connector