Furuno FV-110GX Operator's Manual page 113

To get support
To download diagnostic and statistics reports
Diagnostic report: You can download a diagnostic report. The Diagnostics report
contains information relevant for the service personnel during troubleshooting. It is also
useful documentation of the current setup. It contains all parameters set during
configuration:
The main sections are:
• Software
• System
• Hardware
• Identifiers
• Setup - System data
• Calibration - Calibration Data
• Blocking zones - Blocking zone configuration
• Network - LAN Configuration
• Satellites - Satellite profiles
• Modems
• Operation - Current modem and navigation parameters.
• POST - results of the Power-On-Self-Test
• Active Events - lists the currently active events
• Events - List of all cleared events.
• Statistics - Shock /vibration statistics
• System log
You can download a statistics report. This report contains information relevant for the
service personnel during troubleshooting. You can also configure the system to send
statistics reports at defined time intervals. For further details on this see Diagnostics
report on page 5-26.
To generate a report do as follows:
1. Select HELPDESK from the left navigation pane.
2. Select Modem and/or BUC to include modem and BUC information in the
diagnostics report.
3. Click Apply.
4. Click Download next to the text Diagnostics report.
5. Save the diagnostics report to your computer.
6. Next to the text Statistics report select the interval for the statistics report.
7. Click Download next to the text Statistics report.
8. Save the statistics report to your computer.
7-3