Furuno FV-110GX Operator's Manual page 117

3. Go to the page SERVICE > Line up.
4. Wait until the text next to Status shows: Ready for lineup.
Figure 7-4: Web interface: SERVICE, Line up: Ready for lineup
5. Click the button Activate lineup and wait until the Status text shows Antenna ready.
Follow the instructions from your service provider.
Figure 7-5: Web interface: SERVICE, Line up: Antenna ready
6. Set the values Azimuth and Elevation as advised by the service provider.
7. Follow the instructions from the service provider to make a P1dB compression test
(modem).
8. Click the button Deactivate to leave the line up procedure and to go back in tracking
mode.
To get support
7-7