Furuno FV-110GX Operator's Manual page 22

FV-110GX system
You can make a software update with a connected PC and the built-in web interface of the
ACU.
The ACU has the following interfaces and switch:
• N-connector for ADU cable (50 Ohm).
• 2 x F connectors for Rx and Tx cables (75 Ohm) to GMU.
• Multi connector for NMEA interfaces (for input from GPS compass or Gyro compass).
• RS-422 interface for modem control.
• RS-232 interface for modem control.
• 4 x LAN ports for modem control and user equipment.
• Ground wing nut.
• AC Power connector.
• On/Off power switch (at the front).
The ACU has also a LAN connector at the front to access the service port from the ACU
front panel.
1-6
Figure 1-7: ACU (connector panel)