Table of Contents
Advertisement
3. Enter start and stop azimuth value in degrees for the blocking zone. Values allowed: 0
to 360 degrees. Enter clockwise.
Figure 5-15: Blocking zone, example: 315 - 45 degrees
Figure 5-16: Blocking zone, example: 45 - 315 degrees
4. Enter the start and stop elevation angle for the blocking zone. If you enter nothing,
there will be no blocking zone. Values allowed: -90 to 90 degrees.
You must enter 2 different elevation angles to have an
Important
active blocking zone.
5. Select No TX for zones if you don't want the system to transmit.
Configuration with the web interface
:
5-21
Advertisement
Table of Contents
