Table of Contents
Advertisement
Configuration with the web interface
If not selected, the system also transmits when pointing through areas with blocking
objects. The modem will shut off for TX if no signal is received.
Note
6. Click Apply to save the blocking zones.
5-22
If a blocking zone is defined with TX allowed (No TX not checked), the
modem is not informed about the blocking zone.
Modems may react differently when informed about a blocking zone, this has
influence on recapturing the link. The worst case is that the modem will
search the entire list of available satellites and frequencies when unaware of
the blocking zone, resulting in prolonged down times until the link is
recaptured.
For optimum performance it is recommended to check No TX.
Advertisement
Table of Contents
