Furuno FV-110GX Operator's Manual page 83

Gx terminal
Table of Contents

Advertisement

DASHBOARD
ACU part name,
Part names, serial numbers for ACU and ADU, software version
Antenna part name,
of the FV-110GX.
ACU serial
number, Antenna
serial number,
Software version
Table 5-6: Web interface, DASHBOARD, first section (Continued)
a. Can be altered when using a generic modem profile.
a
MODEM
Model
Modem name, entered in SETTINGS > Modem profiles.
RX locked status
Demodulator lock of the modem.
RX IF frequency
Read out from the modem.
TX allowed
Yes or no. Indicates if the modem supplies the 50 MHz reference
signal on its TX connector (On) and if an iDirect OpenAMIP
modem indicates modem Locked and Tx ON in the OpenAMIP
message L (L 1 1).
Table 5-7: Web interface, DASHBOARD, MODEM section
a. Items shown in this list may vary, they depend on the current modem.
POINTING
Azimuth,
Current value for azimuth, elevation, relative to the vessel heading.
elevation geo
Azimuth,
Current value for azimuth, elevation, relative to the vessel.
elevation rel.
Table 5-8: Web interface, DASHBOARD, POINTING section
TX
BUC TX
On or Off. Shows if the FV-110GX has enabled the BUC or not. It
is the same TX ON/TX OFF as shown in the display of the ACU,
see ACU display and keypad on page 5-36.
Table 5-9: Web interface, DASHBOARD, TX section
Configuration with the web interface
Description
Description
Description
Description
:
5-19

Advertisement

Table of Contents
loading

Table of Contents