Table of Contents
Advertisement
WARNING
Do not place liquid-filled
containers on or near the
equipment.
Fire or electrical shock can
result if a liquid spills into the
equipment.
Do not operate the equipment
with wet hands.
Electrical shock can result.
Use the proper fuse.
Use of the wrong fuse can
cause fire or electrical shock.
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch to
indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or serious
injury can result if the power is
left on or is applied while the
equipment is being installed.
Ensure the unit is properly
grounded.
Improper grounding can cause
electrical shock or interference
from/with other devices.
Use equipment with a suit-
able voltage rating for ship's
mains.
Rated voltage is directed at
each unit, and out of range
voltage may cause damage to
the equipment.
iv
WARNING
Do not approach the FV-110GX
antenna unit when it is trans-
mitting.
The radome emits radio waves
that can be harmful to the human
body, particularly the eyes.
RF power density on
antenna aperture
2
100W/m
2
50W/m
10W/m
2
CAUTION
CAUTIO
Observe the compass safety
distances shown in the table
to prevent interference to a
magnetic compass.
Standard
Unit
1.40 m
Antenna Unit
Antenna
0.30 m
Control Unit
0.40 m
GX Modem Unit
Do not manually turn the
polarosation unit of the
antenna.
The antenna can be damaged.
Distance
30 m
Steering
0.50 m
0.30 m
0.20 m
Advertisement
Table of Contents
