5.4.3
To configure the LAN network
On this page you can enter a host name. The host name helps identifying the FV-110GX
system when sending e-mail reports through an external Internet connection. The ACU
has four 10/100 Mbit Ethernet ports labelled LAN port 1, 2, 3 and 4. The ports are divided
in three groups, each group operating in its own network. You can setup DNS and
Gateway.
Important
To configure the LAN network go to SETTINGS > Network.
Figure 5-17: Web interface: SETTINGS, Network (default settings)
The FV-110GX system is not designed to be connected directly to the
Internet. It must be located behind a dedicated network security device such
as a fire wall.
If any ports of the FV-110GX are exposed to the Internet you must change
the default passwords as anyone with access and malicious intent can render
the FV-110GX inoperable.
Configuration with the web interface
:
5-23