Table of Contents
Advertisement
Configuration with the web interface
• Service switch (service switch in ADU activated)
• Ready (waiting for data from the modem or no satellite profile selected)
• Pointing antenna (locating the satellite)
• Acquiring signal (acquiring the satellite signal)
• Tracking (tracks the current satellite)
• Lineup (line up is activated)
• Azimuth calibration
• TX cable calibration
• BUC calibration
• Test
• Not ready (waiting for input from GNSS, e.g. GPS)
• Not ready: Initializing
• Not ready: Need pos
• Blocking zone (antenna is pointing into a blocking zone)
• No TX zone (antenna is pointing in a no TX zone; TX is off)
Information fields on the Dashboard
DASHBOARD
GNSS position
Vessel heading
Satellite profile
Satellite position
RX polarisation
TX polarisation
RX RF frequency
LNB Lo
frequency
BUC Lo frequency 28.05 GHz (system hardware)
5-18
Current position of the vessel, reported by the GNSS module
Ship's heading in degrees with reference to North, provided by the
ship's gyro.
Name of the currently active satellite profile.
Position of the satellite selected in Satellite profile.
Circular polarisation: Left-hand, Right-hand.
a
Co-pol or X-pol
a
Ka band receiving frequency
18.25 GHz (system hardware)
a
Table 5-6: Web interface, DASHBOARD, first section
Description
Advertisement
Table of Contents
