Technical Specifications; Fip Modules; Mic-X Interface Modules; Power Supplies - H3C SR6602-I AI Series Hardware Information

Technical specifications

FIP modules

Table2-1 FIP-30 specifications
Item
1000BASE-X-SFP Ethernet fiber ports
10GBASE-R-SFP+ Ethernet fiber ports
MIC-X interface module slots
Hot swappable

MIC-X interface modules

The SR6602-I and SR6602-IE ICT converged devices support MIC-X interface modules. For more
information about MIC-X interface modules, see H3C SR6602-I[IE] AI Series ICT Converged
Gateways Interface Module Guide.

Power supplies

IMPORTANT:
To ensure correct operation of the device when it is installed with a GPU, use two 450W power
supplies to supply power to the device.
The device supports AC and DC power supplies but does not support the mixture of AC and DC
power supplies. If you install two power supplies, make sure they are the same model. The power
supplies are hot swappable. With two power supplies present in the device, you can hot swap a
power supply.
AC power supplies
Table2-2 AC power supply specifications
Model
PSR250-12A1
PSR450-12A1
DC power supplies
Table2-3 DC power supply specifications
Model
PSR450-12D
Rated input voltage range
100 VAC to 240 VAC @ 50/60 Hz
100 VAC to 240 VAC @ 50/60 Hz
Rated input voltage
range
–48 VDC to –60 VDC
2-7
Specifications
16
4
2
Yes
Maximum output
current
5 A
7 A
Maximum output
current
15 A
Maximum
power
250 W
450 W
Maximum power
450 W