Problems With Terminals - Black Box 16 port User Manual

Problems with terminals

see also:
The following section concerns problems with the appearance of data on your
terminal screen:
The unit logs me out after a few minutes
•Change the idle timeout value set for the user. The idle timeout for all users is
Corrupt data
•check your line settings (baud rate, stop bits, etc.)
Missing data
•ensure the same type of flow control is set in both your terminal and on the
Error message 'not permitted on a dumb terminal' after typing the cli
•set your line to 'termtype' VT100, ansi or Wyse60 (or other form of terminal
Screen corruption when using the text-based menu system
•check that the terminal setup in the unit matches your terminal.
•check that entries in the term file match your terminal setup.
•if using a PC/computer, ensure the type of terminal emulation selected in your
Black Box Console Server user guide
Login problems on page
set to 300 seconds (5 minutes) by default, because the unit is designed for
remote access connections (using SLIP or PPP).
unit's port.
command 'screen'
emulation, if you have downloaded one). The default line type in the unit is
'dumb' which does not support the graphics characters necessary to view
the text-based menus.
application matches those supported by the unit. If you still have the
problem, you may be suffering with poorly written terminal emulation in
your application. Instead use the command line mode; if you have a web
browser use JETset.
255.
257